|
dsPIC
Development Tools |
|
▋EasydsPIC6 Development System
▋ |
▋BIGdsPIC6
Development System
▋ |
|
|
 The
BIGdsPIC6 is a full-featured development system for 64-
and 80-pin dsPIC microcontrollers. The system features a
USB 2.0 programmer with mikroICD and many peripheral
modules such as Piezo speaker, EEPROM, FTDI, RTC, CAN,
etc. [more
info] |
|
▋dsPICPRO4
Development System
▋ |
▋EasydsPIC4A
Development System
▋ |
|
|
|
|
▋dsPICprog
with mikroICD support
▋ |
▋UNI-DS3
Development System [dsPIC]
▋ |
|
|
|
|
▋BIGdsPIC6
TQFP MCU Cards
▋ |
▋BIGdsPIC6
MCU Cards Empty PCB
▋ |
|
|
|
|
▋dsPIC
MCU cards
▋ |
▋Empty
dsPIC PRO MCU cards
▋ |
|
|
|
|
▋dsPIC-Ready1
Board
▋ |
▋dsPIC-Ready2
Board
▋ |
|
|
|
|
▋dsPIC-Ready3
Board
▋ |
▋dsPIC-Ready4
Board
▋ |
|
|
|
The
EasydsPIC6 is a full-featured development system for dsPIC microcontrollers. The system features a USB
2.0 programmer with mikroICD and many peripherals
such as Piezo speaker, COG, port expander, MENU and
4x4 keypads etc. [
The
dsPICPRO4 supports
the latest 64- and
80-pin dsPIC30F
microcontrollers
from Microchip. It
comes with a
dsPIC30F6014A. The
system includes an
USB 2.0 programmer, mikroICD (In-Circuit
Debugger), touch
panel controller,
CAN, RS485, DAC and RTC.
EasydsPIC4A
is a full-featured development
system that supports the latest 18-,
28- and 40-pin dsPIC30F MCUs. It
comes with the dsPIC30F4013
microcontroller. The board features
a USB 2.0 programmer, mikroICD
(In-Circuit Debugger), touch panel
controller etc. [
The
dsPICprog with mikroICD is a USB 2.0 programmer with
in-circuit debugger used for programming dsPIC30F MCUs
from Microchip. Unlike programmers whose operation
is based on bootloaders, this one is used for
external programming so that the entire memory is
available. [![UNI-DS3 Development System [dsPIC]](http://www.microport.com.tw/picture/Mikro-dsPIC-Devel/UNI-DS3%20Development%20System%20[dsPIC].gif "PICPLC4 v6 PLC System")
The
UNI-DS3 development system supports PIC, AVR, 8051, ARM, PSoC and dsPIC
microcontrollers with a large number
of peripherals. If you want to give
another microcontroller a try you
just have to switch the card and
continue working in the same
development environment. [
BIGdsPIC
TQFP MCU Cards come with an 80-pin
dsPIC30F device in TQFP package
soldered on them. There are an
on-board oscillator and pads
connected to the microcontroller
pins. [
Empty
64- and 80-pin TQFP MCU Cards
support dsPIC30F devices in TQFP
package. You should solder your own
microcontroller and other components
you need on these cards. They are
also compatible with the BIGdsPIC6
development system. [
dsPIC
MCU Cards support 64- and 80-pin dsPIC microcontrollers and are
compatible with our dsPIC PRO
development systems. They come with
the dsPIC30F microcontroller. Due to
a two-line connector, these cards
can be easily connected to
development systems. [
Empty
dsPIC MCU Cards support 80- and
64-pin dsPIC MCUs and are compatible
with our dsPIC PRO development
systems. Solder your MCU and other
electronic components on these
cards. They can be easily connected
to a development system via a
two-line connector.
The
dsPIC-Ready1 Board is a USB
supported prototype board as it
features an on-board USB to serial UART interface device FT232R. The
board supports 40-pin dsPIC30F
microcontrollers such as
dsPIC30F3011, dsPIC30F4011, etc. [
The
dsPIC-Ready2 Board is a USB
supported prototype board as it
features an on-board USB to serial UART interface device FT232R. The
board features extension pin headers
for 40-pin dsPIC microcontrollers
such as dsPIC30F3014, dsPIC30F4013,
etc. [
The
dsPIC-Ready4 Board is a USB
supported prototype board as it
features an on-board USB to serial
UART interface device FT232R. The
board supports 28-pin dsPIC30F
microcontrollers such as
dsPIC30F1010, dsPIC30F2020, etc. [