|
Communication
Boards |
|
▋Serial
Ethernet Board
▋ |
▋Serial
Ethernet 2 Board
▋ |
 The
Serial Ethernet Board is an accessory board
that includes an on-board stand-alone 28-pin
Ethernet controller ENC28J60 with MAC & PHY, 8
Kbytes of Buffer RAM and SPI serial interface. This
board is ideal for connecting microcontrollers to
the serial Ethernet network. [more
info] |
 The
Serial Ethernet 2 Board is an
accessory board that contains ENC624J600
(stand-alone 10/100 Base-T Ethernet
interface controller with integrated MAC & PHY,
24-Kbyte RAM buffer). Board is designed to serve as
an Ethernet network interface for
any microcontroller equipped with SPI. [more
info] |
|
▋mikroETH
Board
▋ |
▋EasyWiFi
Board ▋ |
 The
mikroETH Board includes a 28-pin ENC28J60
Ethernet controller from Microchip with a 10/100
Base-Transformer RJ45 connector. You just
need to connect your device to mikroETH pins in
order to enable connection to the Ethernet network.
[more
info] |
 The
EasyWiFi Board features the ZeroG ZG2100M
module that can be used to connect a development
system to the wireless 2.4GHz 802.11b network
easily. It can operate on both 3.3V and 5V
development systems. Voltage level is selected via
an on-board jumper.
[more
info] |
|
▋WiFi
- PROTO Board
▋ |
▋EasyBluetooth
Board
▋ |
 The
WiFi - PROTO Board includes the ZeroG
ZG2100M module used to connect your prototype
device to wireless 2.4GHz 802.11b network easily.
The module communicates with microcontrollers via
SPI interface. Simple and cost-effective solution to
add Wi-Fi connectivity for embedded devices.
[more
info] |
 The
EasyBlueTooth Board is a low-cost solution
that enables your device to easily implement
wireless Bluetooth communication. Board is equipped
with low-power, highly economic RN-41 module,
compliant with Bluetooth® 2.1/2.0/1.2/1.1
specification that can operate up to 100m distance. [more
info] |
|
▋CAN-1
Board
▋ |
▋CANSPI
Board
▋ |
 CAN-1
Board is an accessory board designed to be used
with microcontrollers that have CAN support. It
features the MCP2551 CAN transceiver. Use the IDC10
connector to connect the CAN-1 board to a
microcontroller, thus enabling it to access the CAN
network. [more
info] |
 The
CANSPI Board is an accessory board that
includes the MCP2515 CAN controller and MCP2551 CAN
transceiver. It can be used with all devices that
have SPI support. This board enables you to easily
connect your microcontroller to the CAN network. [more
info] |
|
▋IrDA
Board
▋ |
▋RS485
Board
▋ |
 If
you need wireless IrDA communication than the
IrDA Board is the best choice. The MCP2155
driver and TFDU4101 diode provided on the board
enable your MCU to easily use IrDA communication.
The board comes with many ready-to-use examples.[more
info] |
 The
RS485 Board includes the ADM485 differential
line transceiver that is designed for balanced data
transmission and complies with EIA standards RS-485
and RS-422. This board comes with many examples and
can be easily connected via an IDC10 connector. [more
info] |
|
▋IrDA2
Board
▋ |
▋LIN
Board
▋ |
 The
IrDA2 Board includes the MCP2120 driver and
TFDU4101 diode. It is used to receive and convert IR
pulses into the corresponding UART formatted serial
data. This board enables your microcontroller to
easily use IrDA communication. [more
info] |
 The
LIN Board is a full-featured board for LIN
bus. It includes a LIN bus transceiver MCP201
providing a physical interface between a
microcontroller and LIN half-duplex bus. It is
intended for use in automotive and industrial
applications. [more
info] |
|
▋MAX3232
Board
▋ |
▋MAX232
Boards ▋ |
 The
MAX3232 Board is used for
establishing RS232 communication
with devices powered from 3.0V to 5.5V
power supply. It contains MAX3232
(RS-232 Transceiver) and DB9 connector
that is used for easier connection with PC or
another microcontroller.[more
info] |
 MAX232
Boards are used to connect the MAX232 circuit to
a prototype board. There is a Dual RS232
Driver/Receiver MAX232N provided on the board. This
circuit is necessary for establishing RS232
communication. All available components are clearly
marked on the board so that there is no need for
additional schematics. [more
info] |
|
▋Ethernet
Connector Boards
▋ |
▋EasyBee
Board
▋ |
 Ethernet
Connector Boards include a 10/100
Base-Transformer RJ45 connector that enables you to
easily connect your prototype board to the Ethernet
network. As soon as you connect your prototype
device to the Ethernet module pins, you are ready to
transmit and receive data using this type of
communication. [more
info] |
 If
you want to use the ZigBee wireless network than the
EasyBee Board is the best solution. The board
includes a high-sensitive ZigBit module with Dual
Chip Antenna that enables you to easily develop your
prototype device. [more
info] |
|
▋Bee
PROTO Board
▋ |
▋Serial
Ethernet PROTO Board
▋ |
 The
Bee PROTO Board is used to connect a
prototype board to ZigBee wireless network using a
low-power, high-sensitive ZigBit module with Dual
Chip Antenna. When the connection is established,
data can be sent/received via the ZigBee wireless
network.[more
info] |
 The
Serial Ethernet PROTO Board enables a
prototype device to be connected to the Ethernet
network. The board includes a stand-alone
Ethernet Controller with MAC & PHY, 8 Kbytes of
Buffer RAM and Serial Peripheral Interface (SPI). [more
info] |
|
▋EasyBT
- Bluetooth Module
▋ |
▋IrDA
PROTO Board
▋ |
 The
EasyBT Bluetooth® Module offers an
effective, low-cost solution that will free your
prototype device from wires by using the Bluetooth
wireless communication for sending and receiving
data. The board is compliant with the Bluetooth®
2.0 Specification.[more
info] |
 The
IrDA PROTO Board allows you to connect your
prototype board to IrDA wireless network by using
the MCP2155 driver and TFDU4101 diode. As soon as
you establish connection, data can be sent/received
via IrDA wireless network. [more
info] |
|
▋EasyBee3
Board
▋ |
▋IrDA-To-PC
Board
▋ |
 The
EasyBee3 Board includes the MRF24J40MA module
used to connect your development board to wireless
2.4 GHz IEEE 802.15.4 network easily. The module
communicates with microcontrollers via a Serial
Peripheral Interface (SPI).[more
info] |
 The
IrDA-To-PC Board is used to enable a PC to
use IrDA communication. The board features MCP2120
along with TFDU4101 diode and other electronics
required for connecting a PC to other IrDA devices. [more
info] |
|
▋USB
UART Boards
▋ |
▋USB
UART 2 Board
▋ |
 The
USB UART Board is a prototype board that
features a USB support with an on-board USB to
serial UART interface device FT232R. There is also a
jumper used for selecting VCC output level provided
on the board. [more
info] |
 The
USB UART 2 Board is a prototype board that
features a USB-to-UART serial converter MCP2200
which enables USB connectivity for prototype
devices that have a UART interface. The board also
features a USB Connector. [more
info] |
|
▋Ethernet
PHY Board
▋ |
|
 The
Ethernet PHY Board features a 100 Ethernet
Transceiver LAN8720 specifically designed for
embedded electronics. It also has a 10/100
Base-Transformer RJ45 connector enabling you to
easily connect your prototype device to Ethernet
network.[more
info] |
|
